MIXERS
PUDDLE
MIXER
ACAN, 50 tons / hour, 60 tons / hour and 70 tons / hour capacity mixer is manufactured.
The double-shafted mixer made by Acan is 3500mm in length and has a bowl measured at 3500x880mm. This set up provides the best way to mix the coal and provides homogeneity of material. A high quality double-walled, insulated, steam circulation machine.
In the coal industry these mixers are usually use liquid ingredients to be processed in before mixing to make the mixture homogenized.
The body of the mixer is made of 4-6 mm thick steel material accordinly to the capacity of the cylinders, each cylinder according to the capacities of the two ends are coated with a layer of 10-12 mm thick steel. These mixers are made of ST 37 steel material. These mixers are used in bearing systems, high-quality heavy-duty bearings. In order for these mixers to operate vibration-free, static and dynamic balance tests are conducted upon the motor with particular care.
PLOUGH
Plough Mixer is a high speed mixer with high homogeneity. During the mixing process, the raw materials are transferred around the drum in a radial, lateral and longitudinal movement by the high speed plough shears and choppers. Moreover, the mixing time is short, especially for free flowing powders or granules. Liquid additive and Heating or Cooling is also applicable.
RIBBON
Ribbon mixer consists of a U-shaped horizontal trough and an agitator made up of inner and outer helical ribbons that are pitched to move material axially, in opposing directions, and also radially. This combination promotes fast and thorough blending.
Principle (single ribbon)
Mixing is functioned by means of pushing back and forth and stirring between two different diameters of ribbon screws which rotate in counter direction but both connect to main shaft
Principle (double ribbon)
The main mixing shaft assembled with a couple of ribbon screw and another single ribbon that making mixture spray and mixing homogenous to arrive best mixing efficiency.